MENU

Pd-Catalyzed Acetylene Hydrogenation: 850°C Surface Motifs

Research Square
Overview
Researchers identified Pd(100)-like 4-fold hollow sites as the key surface motifs for selective acetylene-to-ethylene hydrogenation at 850°C. The study utilized a combination of experimental screening, machine learning potential (MLP), and DFT calculations to determine that these motifs enable high ethylene productivity with low coke formation. This finding suggests a path for downstream upgrading in direct non-oxidative methane conversion (DNMC) without intermediate cooling.
In Depth

Key Findings

Pd catalysts supported on cristobalite demonstrated the highest hydrocarbon formation rate of approximately 3.0 × 10³ µmol-C g cat⁻¹ h⁻¹ at 850°C. The process exhibited high ethylene productivity, negligible deactivation, and low coke formation. Through MLP screening of 31 Pd surfaces, the study determined that Pd(100)-like 4-fold hollow sites bind acetylene substantially more strongly than Pd(111)-like 3-fold sites.

Technical Details

DFT calculations incorporating high temperature entropy corrections confirmed that acetylene adsorption is favorable on Pd(100) and several high-index surfaces exposing 4-fold motifs at 1123 K, while adsorption on Pd(111) was unfavorable. The research also evaluated the impact of tensile strain, finding that strains up to 2.0% had only a minor effect on performance.

On Pd(100)-2.0%, the sequential hydrogenation steps to C₂H₃* and C₂H₄* required activation free energies of 1.03 eV and 1.02 eV, respectively. These barriers were lower than those of competing dehydrogenation and C–C coupling pathways, ensuring selectivity toward ethylene.

Background & Context

The research addresses the challenge of selective acetylene hydrogenation at temperatures relevant to direct non-oxidative methane conversion (DNMC). By achieving hydrogenation at these high temperatures, the need for intermediate cooling and reheating during downstream upgrading is eliminated.

Significance & Outlook

The integration of experimental catalyst screening with MLP-assisted surface analysis and DFT calculations allowed for the precise identification of the Pd(100)-like 4-fold ensembles as the active sites. This methodology demonstrates a viable framework for identifying specific surface motifs responsible for high-temperature chemical conversions, potentially streamlining the development of catalysts for high-temperature industrial processes.

Source: https://doi.org/10.21203/rs.3.rs-11376353/v1

Get our weekly technology intelligence — free

Receive an infographic that lets you judge at a glance whether each field’s analysis report is worth reading.

Subscribe Free — Weekly Tech Intelligence

By subscribing, you’ll receive Troy-Technical’s weekly technology intelligence newsletter.

  • Your email and selected fields are used only to deliver the newsletter.
  • We never share your information with third parties.
  • You can unsubscribe anytime via the link in each email.

See our Privacy Policy for details.

Takes about a minute · Unsubscribe anytime

Published by Troy-Technical, an independent site run by one engineer with a career in materials development.
About the author / Contact info@troy-technical.jp
Let's share this post !

Author of this article

TOC