Adhesives & Sealants– category –
-
Adhesives & Sealants Weekly Report October 4, 2026
▼ ▼ ▼ If the infographic makes you want to read the full report, please click the download button below. ▼ ▼ ▼ 📄 Weekly Report October 04, 2026 (PDF) — Download Weekly Report October 04, 2026 (PDF) — DownloadDownload 🎙 Podcast October 0... -
DIC: Active ester curing agent for 5G/AI signal loss specs
DIC Corporation (Vision Watch) Japan Overview DIC Corporation has developed an innovative active ester-based epoxy curing agent that significantly reduces electrical charge accumulation in epoxy resins, directly addressing signal loss is... -
Tin Material: Heat Trap Effect and 33% solar cell efficiency
IO+ Netherlands, Austria Overview Physicists from the University of Groningen and TU Wien have published findings in ACS Energy Letters revealing that a tin-based material retains sunlight energy far longer than expected. This breakthrou... -
Silicone Oil Solar Panels: 22.6% efficiency and recyclability
EcoPortal.net Unknown Overview Researchers have developed a novel solar panel design utilizing silicone oil as an encapsulant, achieving a 22.6% conversion efficiency comparable to conventional EVA-encapsulated modules. This liquid-fille... -
TUM Bio-Adhesive: 10 MPa shear strength and heat-reactivation
TUM Germany Overview Researchers at the Technical University of Munich (TUM) have developed a fully bio-based adhesive from mistletoe berries, achieving shear strengths exceeding 10 MPa and maintaining performance at -150°C. This innovat... -
CAS 1137971-16-4: UV curing monomer specs to stop migration
PRWeb USA Overview A novel copolymerizable benzophenone photoinitiator monomer (CAS 1137971-16-4) fundamentally resolves critical issues of migration, odor, and precipitation in the UV curing industry. This monomer dual-functions as both... -
TUM Bio-Adhesive: Mistletoe berry specs and -150°C performance
idw Germany Overview Researchers at the Technical University of Munich (TUM) have developed a fully bio-based, high-performance adhesive derived from mistletoe berries. This innovative adhesive achieves shear strengths exceeding 10 MPa a... -
PHOTOBOND PS4140: DELO’s liquid PSA specs for fuel cell GDLs
AZoM Germany Overview DELO has introduced DELO PHOTOBOND PS4140, the world's first liquid pressure-sensitive adhesive (PSA) specifically for fixing gas diffusion layers (GDL) in fuel cells. This innovative product replaces traditional ta... -
Technomelt Supra 130 Cool: Henkel’s 20% CO2 reduction specs
Henkel Germany Overview Henkel Adhesive Technologies introduced a comprehensive portfolio of sustainable packaging solutions at Interpack 2026, featuring the Technomelt Supra 130 Cool hotmelt adhesive. This product achieves a minimum 20%... -
UVPolyZell: Fraunhofer FFB’s polymer binder specs and 80% energy
Fraunhofer FFB Germany Overview The Fraunhofer FFB's UVPolyZell project has successfully developed a polymer binder system for NMC cathodes in lithium-ion batteries that completely eliminates toxic NMP solvents and fluorine-based PVDF po...
