Key Findings
Researchers at the Daegu Gyeongbuk Institute of Science and Technology (DGIST) have successfully reduced the use of dysprosium (Dy) in permanent magnets by 80% while maintaining magnetic performance comparable to existing products. The team, led by principal researchers Jungmin Kim and Donghwan Kim of the Department of Nanotechnology, identified the causes of heavy rare earth waste and developed a method to improve material use efficiency. These results were published on October 12 in the Chemical Engineering Journal.
Technical Details
The research focuses on neodymium, iron, and boron (Nd-Fe-B) magnets. To prevent magnetization loss at high temperatures, “coercivity” must be increased, typically by adding heavy rare earths like dysprosium via “grain boundary diffusion.” In conventional processes, heavy rare earths are applied to the surface and heat-treated to diffuse inward, forming shells around fine grains. However, this often results in excessive accumulation near the surface or unnecessary penetration into grain interiors.
The DGIST team developed a new diffusion material that combines dysprosium with light rare earths—praseodymium (Pr) and neodymium (Nd)—along with zinc (Zn) and copper (Cu). The zinc and copper promote diffusion, while the light rare earths prevent dysprosium from penetrating too deeply into the grain interiors. This ensures the formation of a thin, uniform shell on the grain surfaces. Experiments confirmed that this method mitigates surface accumulation and achieves excellent high-temperature magnetic properties and room-temperature coercivity.
Background & Context
Heavy rare earths are expensive and subject to unstable supply chains. By replacing the heavy use of these materials with precise distribution control, the researchers have addressed a key challenge in magnet manufacturing. The technology allows the material to be placed exactly where it is needed inside the magnet.
Significance & Outlook
While currently verified at a laboratory scale, this approach is expected to be applicable to next-generation magnets using inexpensive light rare earths. For industrial deployment, the team must now demonstrate uniform diffusion in large-scale magnets and validate the economic viability and compatibility within existing manufacturing processes.
Source: https://www.dongascience.com/en/news/80796
Get our weekly technology intelligence — free
Receive an infographic that lets you judge at a glance whether each field’s analysis report is worth reading.
Subscribe Free — Weekly Tech Intelligence
By subscribing, you’ll receive Troy-Technical’s weekly technology intelligence newsletter.
- Your email and selected fields are used only to deliver the newsletter.
- We never share your information with third parties.
- You can unsubscribe anytime via the link in each email.
See our Privacy Policy for details.
Takes about a minute · Unsubscribe anytime



