MENU

Li-S Energy: High-power lithium-sulfur cell specs and applications

PR Newswire Australia
Overview
Li-S Energy has developed two new Power Cell designs that deliver up to 50 times the power of traditional lithium-sulfur chemistry while maintaining an energy density approaching 400 Wh/kg. These cells target weight-critical, high-power platforms including multi-rotor drones, robotics, and communications systems.
In Depth

Key Findings

Li-S Energy has completed the development and testing of two high-power lithium-sulfur cell variants. These cells achieve a continuous power density of 1700W/kg and a peak power density of 2400W/kg. This represents a significant increase in power performance—over 50 times that of traditional lithium-sulfur cells—while preserving a gravimetric energy density approaching 400 Wh/kg.

Technical Details

The company has finalized datasheets for two specific cell designs produced on its automated Phase 3 production line:

  • 10Ah Power Cell: Rated at 2C continuous (yielding 100% of total stored energy) and 5C peak. This variant is designed for systems requiring longer cycle life.
  • 11Ah Power Cell: Rated at 7C continuous (yielding 96% of total stored energy) and 10C peak. This variant is intended for single-use and low cycle life applications where high power is essential.

For comparison, traditional lithium-sulfur cells typically discharge at a continuous rate of only 0.1 to 0.2C.

Background and Context

High power delivery has historically been a limitation of lithium-sulfur chemistry. In 2024, Li-S Energy’s GEN3 cell achieved 456 Wh/kg, roughly twice the energy density of lithium-ion, but was optimized for low-power, long-endurance platforms like fixed-wing drones and marine systems. The new Power Cell range complements the GEN3 by addressing the needs of platforms that require rapid energy discharge.

Significance and Outlook

The ability to combine high energy density with high power delivery opens markets for multi-rotor UAVs, soldier-carried systems, and robotics. The company utilized its Battery Test Centre and Phase 3 production line in Geelong, Victoria, to scale these concepts into commercial-sized cells. Li-S Energy intends to further increase energy density while maintaining high power performance to extend the range, operating time, and payload capacity of target platforms.

Source: https://www.prnewswire.com/news-releases/li-s-energy-finalises-new-high-power-cells-for-fast-drones-robotics-and-communications-302933718.html

Get our weekly technology intelligence — free

Receive an infographic that lets you judge at a glance whether each field’s analysis report is worth reading.

Subscribe Free — Weekly Tech Intelligence

By subscribing, you’ll receive Troy-Technical’s weekly technology intelligence newsletter.

  • Your email and selected fields are used only to deliver the newsletter.
  • We never share your information with third parties.
  • You can unsubscribe anytime via the link in each email.

See our Privacy Policy for details.

Takes about a minute · Unsubscribe anytime

Published by Troy-Technical, an independent site run by one engineer with a career in materials development.
About the author / Contact info@troy-technical.jp
Let's share this post !

Author of this article

TOC