MENU

Cu/Cu Joining: Laser-Structured Surfaces for Paste-Free Bonds

Research Square
Overview
Laser-structured copper surfaces enable direct Cu/Cu joining without filler metals or sintering pastes, achieving apparent shear strengths of 16 and 35 MPa. The study demonstrates that finer, more densely distributed surface features significantly improve interfacial contact and joint strength. This approach reduces process complexity for high-power electronic systems requiring high thermal and electrical conductivity.
In Depth

Key Findings

Direct Cu/Cu joining without the use of sintering pastes, filler metals, or permanent intermediate layers is achievable through laser-structuring of copper surfaces. The study identified two structure variants, with Variant II delivering a higher apparent shear strength of 35 MPa compared to 16 MPa for Variant I. This performance gap is attributed to Variant II’s finer and more densely distributed features, which resulted in a larger surface-enlargement factor and a more continuous interfacial contact morphology.

Technical Details

The researchers utilized a kinematic surface simulation to determine the optimal laser parameter combinations for creating pronounced microstructured topographies. Following the simulation, two distinct structure variants were produced, differing in their lateral feature sizes and surface-enlargement factors. These surfaces were joined under the application of heat and pressure.

To evaluate the quality and strength of the joints, the study employed a comprehensive suite of characterization techniques:

  • Optical microscopy and scanning electron microscopy (SEM)
  • Laser scanning microscopy
  • Cross-sectional analysis and fracture-surface examination
  • Preliminary adapted die-shear testing

Background & Context

Modern electronic systems are facing increasing demands for higher power density and improved thermal management. These requirements necessitate joining technologies that can provide high electrical and thermal conductivity while maintaining mechanical stability. Traditional methods often rely on intermediate layers or pastes, which can increase process complexity and potentially hinder conductivity.

Significance & Outlook

The results indicate that the lateral distribution of laser-generated surface features is a critical factor in the formation of direct Cu/Cu joints. By eliminating the need for filler materials, this paste-free approach offers a path toward reducing complexity in the assembly of high-performance electronic components while maintaining sufficient mechanical stability.

Source: https://doi.org/10.21203/rs.3.rs-11156221/v1

Get our weekly technology intelligence — free

Receive an infographic that lets you judge at a glance whether each field’s analysis report is worth reading.

Subscribe Free — Weekly Tech Intelligence

By subscribing, you’ll receive Troy-Technical’s weekly technology intelligence newsletter.

  • Your email and selected fields are used only to deliver the newsletter.
  • We never share your information with third parties.
  • You can unsubscribe anytime via the link in each email.

See our Privacy Policy for details.

Takes about a minute · Unsubscribe anytime

Published by Troy-Technical, an independent site run by one engineer with a career in materials development.
About the author / Contact info@troy-technical.jp
Let's share this post !

Author of this article

TOC