MENU

MacDermid Alpha BondPad: SiC Power Module Sintering Specs

Bisinfotech USA
Overview
MacDermid Alpha is introducing BondPad, a copper-foil solution using Argomax silver sinter film for die-topside attach in SiC power packages. The technology demonstrates a 30-fold increase in life cycles compared to conventional aluminum wirebonding under specific power-cycling tests. This advancement enables higher reliability for high-power semiconductor packages operating at elevated temperatures and switching frequencies.
In Depth

Key Findings

The BondPad technology achieves over 75,000 cycles under specified power-cycling test conditions, compared to 2,500 cycles for standard conventional aluminum wirebond references. This performance was measured using a 110°C temperature swing, a maximum junction temperature of 175°C, and a current of 180 amperes, with failure defined as a 5% increase in drain-to-source voltage.

Technical Details

BondPad consists of a 50 µm nominal copper foil combined with an Argomax silver sinter film. During the sintering process, the Argomax layer creates a metallurgical bond with the die topside, resulting in a consistent sintered bond line of approximately 20 µm. The exposed copper surface then serves as a landing area for subsequent copper wire or copper ribbon bonding.

Compared to silver sinter paste-based approaches, the BondPad film-laminated solution provides several technical advantages:

  • Elimination of print and dispense dimensional variability.
  • Precise control of bond line thickness.
  • Reduction in overall processing time.
  • Compatibility with existing wire-bonding equipment and tape-and-reel machine placement for automated assembly.

Background and Context

As silicon carbide (SiC) power devices increase operating temperatures and switching frequencies, manufacturers are shifting away from conventional solder and aluminum wire-bonding. There is an increasing demand for sintered die attach and die-topside interconnects capable of withstanding demanding thermal-cycling conditions. MacDermid Alpha is also presenting other sintering and solder products, including ALPHA ARGOMAX AccuLam 8022 silver sintering film and ALPHA TrueHeight Solder Preforms.

Significance and Outlook

The transition of silver sintering technology from traditional die attach to die-topside interconnects addresses the critical need for interface reliability as power density increases. By utilizing established manufacturing infrastructure while improving process control, BondPad provides a scalable method for enhancing the reliability of high-power SiC power modules.

Source: https://www.bisinfotech.com/macdermid-alpha-showcases-upcoming-technology-for-sic-power-modules-at-electronica-2026/

Get our weekly technology intelligence — free

Receive an infographic that lets you judge at a glance whether each field’s analysis report is worth reading.

Subscribe Free — Weekly Tech Intelligence

By subscribing, you’ll receive Troy-Technical’s weekly technology intelligence newsletter.

  • Your email and selected fields are used only to deliver the newsletter.
  • We never share your information with third parties.
  • You can unsubscribe anytime via the link in each email.

See our Privacy Policy for details.

Takes about a minute · Unsubscribe anytime

Published by Troy-Technical, an independent site run by one engineer with a career in materials development.
About the author / Contact info@troy-technical.jp
Let's share this post !

Author of this article

TOC