Key Findings
Longi has developed a two-terminal monolithic tandem solar cell reaching a champion power conversion efficiency of 35.31%. This device achieved a short-circuit current density of 20.82 mA/cm2, an open-circuit voltage of 2.007 V, and a fill factor of 84.53%. Independent certification by China’s National Center of Inspection on Solar Photovoltaic Products Quality (CPVT) confirmed a reverse-scan efficiency of 35.25% and a stabilized efficiency of 35.13%.
Technical Details
The efficiency gain is attributed to the use of specially designed self-assembled molecules (SAMs) that prevent excessive molecular stacking. Researchers tested four derivatives based on the 4PACz molecule (TC0, TC1, TC2, and TC3), finding that TC2 provided the optimal balance of substrate adhesion and charge transport. Molecular simulations showed TC2 achieved 83.1% surface coverage, significantly higher than TC1 (75.0%) and TC3 (73.3%).
The TC2-based SAM modifies the indium tin oxide (ITO) work function to improve energy-level alignment for hole extraction and reduces charge recombination. Furthermore, TC2 promotes controlled perovskite crystallization, resulting in larger grains and higher crystallinity. Photoluminescence measurements for TC2 showed a quantum yield of 1.46% and a quasi-Fermi level splitting of 1.292 eV.
The device architecture consists of:
- A textured silicon heterojunction (HJT) bottom cell.
- An ITO recombination layer and a TC2-based SAM hole-selective contact.
- A perovskite absorber topped with a lithium fluoride (LiF) interlayer, C60 electron transport layer, and SnOx buffer layer.
- A transparent indium zinc oxide (IZO) electrode, silver (Ag) contact, and MgFx optical coating.
Stability and Context
Stability tests under the ISOS-L-1 protocol showed the device retained 94% of its initial efficiency after 1,500 hours of continuous operation. Under the ISOS-L-2 protocol (65 C), it retained 82% efficiency after 1,000 hours. This research, published in Nature, involved collaborations with Soochow University, Northwestern Polytechnical University, and Hong Kong Polytechnic University.
Significance and Outlook
This development follows a trend of molecular interface engineering. Previous milestones include a 31.71% efficient cell via chemical polishing and a 32.12% certified efficiency cell using steric-complementary interface design. Longi’s latest result demonstrates that optimized molecular interfaces can simultaneously enhance efficiency, charge transport, and operational stability in tandem cells.
Get our weekly technology intelligence — free
Receive an infographic that lets you judge at a glance whether each field’s analysis report is worth reading.
Subscribe Free — Weekly Tech Intelligence
By subscribing, you’ll receive Troy-Technical’s weekly technology intelligence newsletter.
- Your email and selected fields are used only to deliver the newsletter.
- We never share your information with third parties.
- You can unsubscribe anytime via the link in each email.
See our Privacy Policy for details.
Takes about a minute · Unsubscribe anytime



