PEEK– tag –
-
PEEK Adoption Accelerates in Semiconductor Equipment: Exceptional Purity, Thermal Performance, and Chemical Resistance Drive Wafer Handling Advancements
Poly Fluoro Ltd India Overview PEEK (Polyether Ether Ketone) is increasingly adopted as a high-performance polymer in semiconductor manufacturing equipment due to its exceptional purity, thermal performance, chemical resistance, dimensio... -
JLC3DP Clarifies PLA’s Practical Heat Resistance Limit for 3D Printing at Below 50-60°C, Recommends High-Performance Materials for Elevated Temperatures
JLC3DP China Overview JLC3DP has released guidelines on the heat resistance of PLA, a common 3D printing material. While PLA softens around 55-65°C and melts at 150-180°C, sustained high-load applications should avoid temperatures exceed... -
INTAMSYS and JLC3DP Launch Scalable PEEK and PEKK 3D Printing Services for Aerospace and Semiconductor Applications
INTAMSYS / JLC3DP China Overview INTAMSYS and JLC3DP have introduced scalable 3D printing services for PEEK and PEKK, targeting high-demand engineering sectors such as aerospace, semiconductors, energy, automotive, and robotics. Supporte... -
Bilby3D Unveils High-Temperature 3D Printing Filaments, Including ThermaX PEEK/TPI, for Aerospace and Automotive Sector Operating Above 120°C
Bilby3D Australia Overview Bilby3D has introduced a new line of high-temperature 3D printing filaments, featuring advanced polymers like ThermaX TPI (Thermoplastic Polyimide) and ThermaX PEEK. These materials are engineered to withstand ... -
JLC3DP Specifies PLA Heat Resistance Limit at 55-65°C, Recommends PETG, ABS, PEEK for Applications Above 50-60°C
JLC3DP China Overview JLC3DP has released a detailed guide on the heat resistance of PLA (Polylactic Acid) in 3D printing, clarifying that its rigidity typically begins to degrade around 55-65°C. Despite a melting point of 150-180°C, thi... -
Royal Society of Chemistry Unveils In-Situ Additive Manufacturing Platform for Embedded Multifunctional Laser-Induced Graphene in PEEK
Materials Horizons (Royal Society of Chemistry) UK Overview Research published in Materials Horizons by the Royal Society of Chemistry presents an innovative platform enabling in-situ additive manufacturing of multifunctional laser-induc... -
H-O Products Offers High-Performance Polyimide and PEEK Films for Industrial Applications, Withstanding Temperatures from -269°C to Over +240°C
H-O Products USA Overview H-O Products is supplying high-performance films, papers, and laminates, including polyimide films and Victrex APTIV® PEEK films, engineered for extreme temperature resilience from -269°C to +240°C (and up to +4... -
Comparative Analysis of Major Polymer 3D Printing Processes FDM, SLA, SLS: Supporting Broad Range of Materials from PLA to PEEK
ACS Material USA Overview The three major polymer 3D printing processes—Fused Deposition Modeling (FDM), Stereolithography (SLA), and Selective Laser Sintering (SLS)—are compared based on their fundamentally different fabrication methods... -
CarbonX Announces High-Strength, High-Heat PEEK CF10 Thermoplastic for 3D Printing in Aerospace and Medical Applications
3DXTECH USA Overview CarbonX has unveiled PEEK CF10, a carbon fiber-reinforced Polyether Ether Ketone thermoplastic designed for the 3D printing market. This material offers exceptional strength, stiffness, and dimensional stability, mai... -
Fraunhofer ILT and IWM Develop Laser-Based Manufacturing Process for PFAS-Free Coatings, Achieving Reduced Friction and Enhanced Wear Resistance
Home of Welding Germany Overview Researchers at Fraunhofer ILT and IWM in Germany have developed an innovative laser-based manufacturing process for PFAS-free coatings. This technology applies diamond-like carbon (DLC) coatings to polyme...
