MENU

Noctua NT-CP1: Carbon Nanotube Thermal Pad Specs and Performance

XenoSpectrum USA
Overview
Noctua has released the NT-CP1, a carbon nanotube thermal pad for AM5 and AM4 CPUs that improves in thermal conductivity over time through thermal cycling. While initial performance is lower than high-performance paste, it can eventually surpass NT-H1, with the break-in period varying from 130 to 3,700 cycles depending on the hardware configuration.
In Depth

Key Findings

The NT-CP1 thermal pad exhibits a two-stage performance improvement process. Initial cooling is limited by a phase-change polymer coating, but performance increases as the pad undergoes thermal cycles—defined as the contact surface heating above 60°C and cooling below 50°C. In tests comparing the pad to NT-H1 paste, the number of cycles required to overtake the paste ranged from 130 to 3,700. For example, with a 7950X and NL-LC1-24, the pad surpassed NT-H1 at 130 cycles and was approximately 2°C cooler by 1,000 cycles.

Technical Details

Manufactured by Carbice, the NT-CP1 is a 33 × 33 mm sheet with a total thickness of 90 µm. Its architecture consists of a 50 µm aluminum core for structural strength and lateral heat spreading, sandwiched between two 20 µm layers of vertically aligned carbon nanotubes for vertical heat transfer. The surface features a tacky phase-change polymer coating that flows when heated to improve contact.

The break-in process occurs in two phases:

  • Initial phase: Under loads of 200 W or more, the coating changes within the first 5 to 10 cycles.
  • Secondary phase: The nanotubes gradually conform to surface irregularities over several hundred to several thousand additional cycles.

Independent measurements by Igor’sLAB showed the joint thickness decreasing from 90.8 µm to approximately 68–70 µm during the first heat-up.

Background and Context

Noctua provides an optional break-in script using Prime95 to accelerate this process; 100 cycles of alternating 5-minute load and cooling periods take approximately 16 hours and 35 minutes. The pad is designed for the AMD AM5 and AM4 platforms and is priced at US$24.95 / €24.95.

Significance and Outlook

The NT-CP1 is positioned for long-term stability, with Noctua citing tests of over 100,000 thermal cycles and a projected lifespan of 10 years or more. While the pad can often be reused, Noctua does not officially support reuse in critical applications, particularly if the pad shows sharp creases or exposed aluminum.

Source: https://xenospectrum.com/en/noctua-nt-cp1-thermal-pad/

Get our weekly technology intelligence — free

Receive an infographic that lets you judge at a glance whether each field’s analysis report is worth reading.

Subscribe Free — Weekly Tech Intelligence

By subscribing, you’ll receive Troy-Technical’s weekly technology intelligence newsletter.

  • Your email and selected fields are used only to deliver the newsletter.
  • We never share your information with third parties.
  • You can unsubscribe anytime via the link in each email.

See our Privacy Policy for details.

Takes about a minute · Unsubscribe anytime

Published by Troy-Technical, an independent site run by one engineer with a career in materials development.
About the author / Contact info@troy-technical.jp
Let's share this post !

Author of this article

TOC