PAST ARTICLE SEARCH
Search Polymers & Resins Articles
Find Polymers & Resins coverage by technology, company, or a free keyword search.
513 published articles60 technology terms9 companies
Search by Technology
Select a technology term to view related Polymers & Resins articles.
Search by Company
Select a company to view related Polymers & Resins articles.
Keyword Search
Search titles and article content within Polymers & Resins.
Results
Matching articles will appear here.
Select a technology term or company, or enter a keyword.
Latest articles in Polymers & Resins
The 100 most recent articles. Use the search above to filter by technology, company, or keyword.
- Polymers & Resins Weekly Report October 11, 20262026-10-11
- Toray film capacitor: 150°C inverter cooling specs explained2026-10-11
- Toray PPS recycling: Solvent technology and 2030 roadmap2026-10-11
- Tohoku University AI: Polymer microstructure analysis explained2026-10-11
- TEPCO self-healing polymer: 40μm crack repair specs explained2026-10-11
- UNSW Sydney Bioplastic: Wastewater algae resin specs explained2026-10-11
- Encarmas Supercritical Fluid: Carbon fiber recovery specs 20262026-10-11
- UMATEX Carbon Fiber: 2026 impact damage prediction explained2026-10-11
- IISc Carbon Fiber: Self-healing vitrimer matrix specs explained2026-10-11
- SLA 825 Dual: 3D Systems’ 2026 build speed and volume specs2026-10-11
- EU PFAS Restrictions: Roadmap for 14,000 chemicals in 20262026-10-11
- Polyurethane Pyrolysis: University of Ljubljana’s 2026 method2026-10-11
- BhEstB Enzyme: University of Hamburg’s PET degradation specs2026-10-11
- EU PFAS Ban: 2025 firefighting foam regulations explained2026-10-11
- SOLFIGA PPS: Teijin’s PFAS-free grades and 2026 specs2026-10-11
- Polymers & Resins Weekly Report October 4, 20262026-10-04
- RespiGard: Asahi Kasei PFAS-free polypropylene membrane specs2026-10-04
- KAIST: Biodegradable aromatic PHA adhesives vs petroleum melts2026-10-04
- Vulkollan: Covestro chemical recycling pilot carbon reduction2026-10-04
- IFUN: Dental Model Resin 3160 3D printing specs and HDT2026-10-04
- CRRC: 110m recyclable wind turbine blade material recovery specs2026-10-04
- Polymer Informatics: arXiv’s AI super-intelligence roadmap2026-10-04
- EU Cosmetics Regulation: PFAS and microplastics 2035 timeline2026-10-04
- IsPETase-M8 explained: Sun Yat-sen University’s PET enzyme2026-10-04
- Polyurethane waste: 13.6 wt% Toluene Diamine yield specs2026-10-04
- PFAS ban: ECHA’s 2026 proposal for 14,000+ chemical compounds2026-10-04
- EU PFAS Restrictions: Food packaging compliance timeline for 20262026-10-04
- DIC Corporation: New epoxy curing agent for GenAI signal loss2026-10-04
- PEDOT:PSS Bioelectronics: WashU’s 3D-printable tissue compatibility2026-10-04
- Bio-Based Epoxy Vitrimers: Recyclable strength vs petroleum plastics2026-10-04
- CRRC: 110m recyclable wind turbine blade specs and 95% recovery2026-10-04
- Polymers & Resins Weekly Report September 26, 20262026-09-27
- PVF & NBC Meshtec: Polymer mesh for electrolyzer specs 20262026-09-26
- CO2 Polyester: Colorado State University’s recyclable platform2026-09-26
- EU PFAS limits: 50 ppm food packaging standards for 20262026-09-26
- E. coli adhesives: Biodegradable vs commercial EVA performance2026-09-26
- PUR2ISO: Purtiso’s 100% polyurethane recovery process explained2026-09-26
- Vulkollan: Covestro’s 2026 chemical recycling plant specs2026-09-26
- NHN Composite Paper: 180°C Class H insulation specs explained2026-09-26
- Wind Turbine Blades: 170-foot recycling process explained2026-09-26
- CRRC: 110-meter recyclable wind turbine blade recovery specs2026-09-26
- AXIOM Materials: High-temp composite prepregs’ 315°C specs2026-09-26
- Vitrimer Plastic: Korean researchers’ 300°C specs and roadmap2026-09-26
- Polymers & Resins Weekly Report September 20, 20262026-09-20
- Röchling Automotive Unveils Fully Recyclable Thermoplastic Lightweight Solutions for Commercial Vehicles at IAA Transportation 20262026-09-20
- SSUCHY Project Demonstrates Hemp and Wood-Based Bio-Composites Match or Exceed Fossil-Based Materials in Automotive & Aviation2026-09-20
- Eastman Revolutionizes Plastic Recycling: Kingsport Molecular Recycling Facility Successfully Converts Hard-to-Recycle Waste into High-Quality Materials2026-09-20
- EU to Impose Strict PFAS Limits on Food Contact Packaging from August 12, 2026 — Harmonized Testing Methods Urgently Needed2026-09-20
- Newly Identified Comamonas serinivorans ATH Strain Converts Volatile Fatty Acids from Organic Waste into PHA Bioplastic2026-09-20
- Compost-Derived CCPUR1 Enzyme Simultaneously Degrades Polyurethane and Nylon, Advancing ‘Holy Grail’ of Difficult-to-Recycle Plastics2026-09-20
- US DOE Funds Protein Evolution’s $3M Enzyme Tech to Industrialize Polyester Garment Recycling2026-09-20
- Researchers Develop Enzyme to Break Down Polyurethane Shoe Foam, Marking a Key Step Towards Recycling Challenging Thermoset Plastics2026-09-20
- Covestro Inaugurates Pilot Plant in Leverkusen to Advance Chemical Recycling of High-Performance Vulkollan® Elastomers, Targeting 90% Mass Recovery and 66% Carbon Reduction2026-09-20
- US States Divided on PFAS Regulation: California Governor Rejects Bill Lacking Fluoropolymer Exemption Amid Debate on ‘Forever Chemicals’2026-09-20
- EU and US Diverge on PFAS Regulation: EU Pursues Broad Restrictions, US Adopts Fragmented Approach Impacting Semiconductor Industry2026-09-20
- Suzhou Shincell Develops High-Strength Microcellular FR-MPP10 Sheet for Battery Sealing and REACH-Compliant TPU Foam2026-09-20
- Samsung Patents Wearable Electronic Device with Polarizing Structure Featuring Sub-10×10^-6/°C Thermal Expansion Layer2026-09-20
- SUNLU and Inslogic Jointly Unveil ‘i10’ Filament Dehumidifying Cabinet, Utilizing Molecular Sieve Technology for Highly Hygroscopic Filaments like Nylon, PVA, and TPU2026-09-20
- Dental 3D Printers Recommended for Rapid In-Office Production of Guides, Models, and Temporaries Using Photoresist Resins, According to GlobalDentex Checklist2026-09-20
- Apple Introduces Groundbreaking Multi-Layer Custom Photoresist 3D Printing to Eliminate Undulations in Foldable iPhone ‘Duo’2026-09-20
- Huntsman Polyurethanes Reinforces Global Leadership in MDI-Based Polyurethanes, Contributing to Automotive Lightweighting and Extended Product Lifecycles2026-09-20
- Sumitomo Chemical and Gutenberg Co-develop High Thermal Conductivity, Aluminum-Strength LCP Filament for FFF 3D Printers; Sample Provision Expected in 20262026-09-20
- Polymers & Resins Weekly Report September 12, 20262026-09-13
- Kanazawa University’s Dr. Tatsuno Details How Thermoplastic Composites (CFRTP) Are Poised to Revolutionize Automotive Mass Production2026-09-13
- Sigma-Aldrich Enhances Fuel Cell Polymer Electrolyte Membranes: Enabling Low-Temperature Operation and High Durability to Advance PEFC Technology2026-09-13
- High-Toughness CFRP from Toray Revolutionizes Aircraft Fuel Efficiency and Emissions Reduction2026-09-13
- Teijin Revolutionizes Automotive Lightweighting with Sereebo®: A Mass-Produced Carbon Composite Offering 40% Weight Reduction and 10x Impact Resistance2026-09-13
- DuPont Supercharges Vespel® R&D in Japan to Meet Soaring Electronics Demands2026-09-13
- Georgia Tech Pioneers Generative AI for Polymer Design, Accelerating Discovery and Slashing R&D Costs2026-09-13
- Revolutionizing Composites: Nagoya Tech’s Solid Catalyst Recovers High-Quality Carbon Fibers from CFRP Waste2026-09-13
- Shinshu University Unveils PFAS-Free Fuel Cell Membrane, Achieving 100,000 Cycles at 120°C for Next-Gen PEFCs2026-09-13
- Mitsubishi Chemical Elevates DURABIO: A Bio-Engineering Plastic Pushing Performance and Sustainability Boundaries2026-09-13
- Albion Adopts Mitsubishi Chemical’s Plant-Derived Bio-Engineering Plastic “DURABIO” for Cosmetic Compact Cases2026-09-13
- Teijin Revolutionizes CFRP: Self-Healing, Highly Recyclable Thermoset Material Poised for Sustainable High-Performance Applications2026-09-13
- WHILL’s New ‘Model C Lite’ Personal Mobility Incorporates Teijin’s Thermoplastic Carbon Fiber Composite, Achieving an Ultra-Light 18.6kg2026-09-13
- Avantium Partners with Sojitz Pla-Net to Propel Plant-Based PEF “releaf®” Adoption in Japanese Market2026-09-13
- FDA Solidifies Distinction: Medical Fluoropolymers Deemed Safe, Exempt from Broad PFAS Concerns2026-09-13
- Novel Recycling Technology Decomposes Carbon Fiber-Reinforced Polybenzoxazine Composites, Recovers Carbon Fibers with Minimal Damage2026-09-13
- TOWA Contributes to AI Semiconductor Thermal Management and Productivity with ‘Mold Underfill (MUF)’ Technology via US-JOINT Platform2026-09-13
- PEEK Adoption Accelerates in Semiconductor Equipment: Exceptional Purity, Thermal Performance, and Chemical Resistance Drive Wafer Handling Advancements2026-09-13
- Sucrose-Assisted Boron Nitride Interface Engineering Yields BT-Based High-Frequency Substrates with Ultra-Low Dielectric Loss of 0.003 at 10 GHz and Enhanced Thermal Conductivity2026-09-13
- Glass Core Substrates Poised to Resolve Warpage Issues in Data Center AI Accelerators by 2030, Addressing ABF Substrate Limitations2026-09-13
- ZAECOTECH Elucidates Mechanical Properties of Biomass-Derived Thermosets for Wind Blades, Paving Way for Closed-Loop Recycling2026-09-13
- NIST Commercializes New 3D-Printing Reference Material RM 8047 to Standardize Photopolymer Manufacturing, Enhancing Quality Control and Reproducibility2026-09-13
- Researchers Develop Multi-Layer Metal and Ceramic Coatings for 3D-Printed Polymer Parts, Significantly Enhancing Wear Resistance and Adhesion2026-09-13
- JLC3DP Clarifies PLA’s Practical Heat Resistance Limit for 3D Printing at Below 50-60°C, Recommends High-Performance Materials for Elevated Temperatures2026-09-13
- ACS Review Highlights ‘Functionalization Paradox’ in Sustainable AM, Cautioning Against Increased Carbon Footprint from Bio-Derived Materials’ Chemical Modification2026-09-13
- Comprehensive Review on Sustainable Polymer Additive Manufacturing Published by MDPI, Advocating Multi-Faceted Evaluation of Performance, Processing Burden, and Recyclability2026-09-13
- Novel Hyperbranched Polyphenylsiloxane-Modified Epoxy Resin Achieves Dielectric Constant of 2.82 and Dissipation Factor of 0.02050 at 100 MHz for Electronic Packaging2026-09-13
- Sumitomo Chemical and Gutenberg Co-Develop Liquid Crystal Polymer Filament for 3D Printing in Semiconductor and AI Applications2026-09-13
- INTAMSYS and JLC3DP Launch Scalable PEEK and PEKK 3D Printing Services for Aerospace and Semiconductor Applications2026-09-13
- Bilby3D Unveils High-Temperature 3D Printing Filaments, Including ThermaX PEEK/TPI, for Aerospace and Automotive Sector Operating Above 120°C2026-09-13
- Polymers & Resins Weekly Report September 6, 20262026-09-06
- Veloxis Pharmaceuticals Initiates First Patient Dosing in Phase 2 RENGEVITY-201 Trial for Pegrizeprument to Prevent Organ Rejection in Kidney Transplant Recipients2026-09-06
- UK’s International Composites Summit 2026 to Gather Over 250 Industry Leaders in London for Collaboration and Innovation2026-09-06
- Composites & Advanced Materials Expo (CAMX 2026) to Convene Industry Leaders and Showcase Trends in Atlanta2026-09-06
- Ibaraki University Elevates Fuel Cell Performance: Pinpointing Optimal Hot-Press for Marimo Carbon MEAs2026-09-06
- WHILL Model C Lite Integrates Teijin’s Sereebo P for Breakthrough Lightweighting2026-09-06
- Law Firm Bergeson & Campbell Issues Renewed Warning as Minnesota’s PFAS Reporting Deadline (September 15, 2026) Rapidly Approaches, Highlighting May 2026 Statutory Amendments2026-09-06
- Minnesota Pollution Control Agency Urges Manufacturers to Comply with Looming PFAS Product Reporting Deadline (September 15, 2026) Under “Amara’s Law”2026-09-06